 |
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
 |
 |
|
||||||||
 |
|
||||||||||
 |
 |
|
|||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
 |
|
||||||||||
Using a 1/144 scale Gundam Arm with your Micros
What you will need
|
 |
| First remove the metal ends completely from the Female Disconnects 22-18awg. The easiest way is to twist them out with a plyers.Here you can see a few that have been separated |  |
| Next determine how far out you want the shoulder to stick. Why, because we are going to be cutting the connector so that we can attach the joint |  |
| Next, take your Gundam kit. They come with softer plastic connectors that act as the joints. Select one of these and glue it to the end of your cut connector. Here you can see a connector that I hot glued to a Gundam joint. |  |
| Next, attach it to your shoulder parts and you are ready to go. |  |
 |
 |
| The easiest figure to use this on is the Acroyears. Here is a figure I attached it too using an Acroyear chest torso. |  |